background image

JADEVER SCALE 

SNUG III                                                                                                                               

15

 

 

Warranty of product 

 

 

 

User’s name:                                                                     

Model of product:                                   

Serial No. of product:                                   

Purchase date:                                                                       
           

We appreciate your purchasing our products, and we have the honor to inform 

you that you may enjoy one-year’s free service from the purchase date by showing 
this warranty of product. 

 

  In case the trouble is due to one of the following causes, you will be charged the 

reasonable fee for material cost or service even if the scale is still in the warranty 
period, and we beg your pardon for this. 

 
1.  You fail to show the warranty of products, or the writing of the warranty is too 

illegible to be discerned.   

2. The damage of scale is due to the abnormal or incorrect application. 
3. The trouble of scale is due to the modification or maintenance made of your own 

accord. 

4. The damage of scale is due to natural catastrophes.   
5. The damage of scale is due to such factors as pest insect, pest rodents or other 

adverse environmental factors. 

 

  After the expiration of the warranty period, you will be charged the reasonable fee 

for our after-sale service. 

 

  The warranty without being stamped by the dealer or being filled with purchase 

date will be invalid. 

 
 
 
 
 
 
     
 
 
 

 

Summary of Contents for SNUGIII Series

















Reviews: