JADEVER SCALE
SNUG III
13
6-2 Printing format of various peripheral devices
PC SH-24
ZEBRA
BP443
2007-07-10 10:26:22
T.W.: + 0.00g
N.W.: + 0.06g
G.W.: + 0.06g
2007-07-10
10:30:23
T.W.: + 0.00g
N.W.: - 0.25g
G.W.: - 0.25g
2007-07-10
10:26:22
T.W.: + 0.00g
N.W.: + 0.06g
G.W.: + 0.06g
2007-07-10
10:26:22
T.W.: + 0.00g
N.W.: + 0.06g
G.W.: + 0.06g
2007-07-10 10:26:59
Total:+ 3PCS
2007-07-10
10:31:18
Total:+
10PCS
2007-07-10
10:26:59
Total:+ 3PCS
2007-07-10
10:26:59
Total:+ 3PCS
2007-07-10 10:28:02
Total:+ 7%
2007-07-10
10:32:09
Total:+ 9%
2007-07-10
10:26:59
Total:+ 3%
2007-07-10
10:26:59
Total:+ 3%
6-3 Specification of USB interface application
For applying USB devices, the cautions below must be followed:
1. This USB interface may be connected only with computers.
2. The computer must be installed first with the necessary driving program that may be
downloaded from the website of our company.
3. After the driving program for computer is installed, the communication between this
device and the computer acts as serial communication. The serial transmission speed
should be set correspondingly.
USB peripheral devices should be used as follows:
1. Connect this electronic scale to a computer with USB line and then start the electronic
scale; in case the computer has not been installed with the needed driving program, the
computer will show the related information to prompt that a new hardware is found and
needs the driving program.
2. After the installation of driving program, perform a test with hyper-terminal of computer to
determine whether data is transmitted. The procedure for opening hyper-terminal of
computer is as follows: Start — all programs — attachments — communication —
hyper-terminal; input the name press down button “Confirm” to confirm the inputted name,
select COM3 or COM4, and then press down button “Confirm” once again; select the
corresponding serial transmission speed (select 9600 if the scale is set as 9600), confirm
it, and then communication can be started.
3. USB communication is like RS-232 communication; if users have their own receiving
terminals of computer, they may use their own terminals for the communication.
Users may select one out of USB interface and RS-232 interface based on their
requirement.
