JADEVER SCALE
SNUG III
3
2-3 Adjustment of leveler
1. Leveler (A) is located at the left side of
operation panel; the standard for judging if
the scale body is placed horizontally is that
if the bubble (C) is within the circle (B) .
2 In case the bubble is outside the circle, you
should adjust four adjusting feet (D) at the
bottom of the scale with hands direct.
3. Adjustment: the bubble will move towards
the highest foot, therefore it is enough to
raise the foot that is in the opposite
direction of the bubble, and the scale will
be horizontal.
2-4 Function specification of buttons and display window
Button for Start/Stop.
Button for zeroing. It returns the weight to zero, may return the value displayed on
screen to “zero” position (zeroing range is ±2% of the full range).
Button for deduction of tare, used to deduct the weight of article on the pan.
Button for shifting weighing function; it may be cycled from weighing mode, counting
mode, percentage mode to printing time setting mode sequentially.
Button for shifting weighing units; total 13 weighting units may be selected.
Button for switching on/off backlight under the weighing mode (the button will take
effect only when backlight is set to ON or OFF). It is the button for sampling entry
and sampling execution under counting mode and percentage mode.
