background image

17/43

1. Introduction

SAFETY GUIDELINES – DEFINITIONS

SAVE THESE INSTRUCTIONS:

 This manual contains information for the proper 

assembly, operation and care of your equipment. Carefully read and follow the 
instructions contained in this manual before using your equipment.

This equipment was designed to apply granules, such as fertilizers, either in spot 
or in-row applications. It can be adjusted to the operator’s needs. It is ideal to be 
used in coffee and banana plantations, reforestation areas, and vegetable and 
fruit crops.

It is important for you to read and understand this manual. The information it 
contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The 
symbols below are used to help you recognize this information.

2. Specifications

Model

GB-18

Maximum dimensions (L x W x H)

428 x 279 x 626 mm /

16.8 x 10.9 x 24.6 in

Net weight

5.3 kg / 11.6 lbs

Gross weight

6.9 kg / 15.2 lbs

Lance length

932 mm / 36.6 in

Tank

Capacity

18 L / 4.7 gal

Filling opening diameter

140 mm / 5.5 in

Material

Polyethylene

Application
Dosage

30 – 300 g / 1 - 10.5 oz.

Linear

60 – 200 g/m / 2.1 - 7 oz./ft

Band Width *

up to 2.1 m / 6.8 ft

DANGER!

Indicates an imminently hazardous situation which, if not avoided, will 
result in death or serious injury. 

WARNING!

Indicates a potentially hazardous situation which, if not avoided, could 
result in death or serious injury.

3. General Power Tool Safety Warnings

WARNING!

Read all safety warnings and all instructions. Failure 
to follow the warnings and instructions may result in 
electric shock, fire and/or serious injury.

CAUTION!

Indicates a potentially hazardous situation which, if not avoided, may 
result in minor or moderate injury.

NOTE: Used without the safety alert symbol indicates a potentially hazardous 

situation which, if not avoided, may result in property damage.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

The term “power tool” in the warnings refers to your mains-operated (corded) 
power tool or battery-operated (cordless) power tool.

3.1. Work area safety

a.  Keep work area clean and well lit.

 Cluttered or dark areas invite accidents.

b.  Do not operate power tools in explosive atmospheres, such as in the pres-

ence of flammable liquids, gases or dust.

 Power tools create sparks which 

may ignite the dust or fumes.

c.  Keep children and bystanders away while operating a power tool.

 Distrac-

tions can cause you to lose control.

Operator’s Manual

by MÁQUINAS AGRÍCOLAS JACTO S.A.

CNPJ: 55.064.562/0001-90

Rua Dr. Luiz Miranda, 1650 - 

17580-000 - Pompeia - SP - Brazil

Manufactured

Technical assistance 

Battery JB 1640**

Type

Li-íon, rechargeable 

Rated Voltage

14.5 V (16.8 V max.)

Capacity

42.1 Wh (2900 mAh)

Recharge time

2 h

Autonomy***

5 - 16h

Battery JB 1680**

Type

Li-íon, rechargeable

Rated Voltage

14.5 V (16.8 V max.)

Capacity

84.3 Wh (5800 mAh)

Recharge time

4 h

Autonomy***

12 - 30h

3.2. Electrical safety

a.  Power tool plugs must match the outlet. Never modify the plug in any 

way. Do not use any adapter plugs with earthed (grounded) power tools.

 

Unmodified plugs and matching outlets will reduce risk of electric shock.

b.  Avoid body contact with earthed or grounded surfaces such as pipes, ra-

diators, ranges and refrigerators.

 There is an increased risk of electric shock if 

your body is earthed or grounded. 

c.  Do not expose power tools to rain or wet conditions.

 Water entering a pow-

er tool will increase the risk of electric shock.

d.  Do not abuse the cord. Never use the cord for carrying, pulling or un-

plugging the power tool. Keep cord away from heat, oil, sharp edges or 

moving parts.

 Damaged or entangled cords increase the risk of electric shock.

e.  When operating a power tool outdoors, use an extension cord suitable 

for outdoor use.

 

Use of a cord suitable for outdoor use reduces the risk of electric 

shock.

f.  If operating a power tool in a damp location is unavoidable, use a ground 

fault circuit interrupter (GFCI) protected supply.

 Use of a GFCI reduces the 

risk of electric shock.

Code: 1285000 / Date: 09-2021 / Edition: 1

Dr. Luiz Miranda, 1650, 17580-000 – Pompeia – SP – Brasil. 

E-mail:

 [email protected]

Home page:

 www.jacto.com

OBS**.: Both battery models are compatible with this equipment.
OBS***.: Battery life can range according to the frequency of applications and the 
use of AG-95 electric spreader (accessory sold separately).

OBS*.: The band width depends on the height and angle of the disc (AG-95 Elec-
tric Spreader), as well as on the condition, granulometry and density of the input.

3.3. Personal Safety

a.  Stay alert, watch what you are doing and use common sense when oper-

ating a power tool. Do not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication.

 A moment of inattention while 

operating power tools may result in serious personal injury.

Summary of Contents for GB-18












































Reviews: