1/3
Instructions on how to spray walls with the W 985 E
With the HVLP fine-spraying WAGNER devices you will obtain especially smooth and even
surfaces. For example, you can use them to coat walls and ceilings. These instructions are
based on the WallPerfect W 985 E fine-spray system.
1. Clear the room and cover the floors and furniture. Use cardboard, cover fleece and/or
masking tape. Mask the doors and corners. Make sure the masking tape sticks well.
2. Connect up the spray lance and grip.
3. Connect the spray head to the end of the lance by clicking it into place.
4. Insert the pull-wire into the holding fixture and turn it until you have the right amount of
tension.
5. Press the paint hose into the front slot.
6. Make sure the entire length is taut from where it leaves the slot and then press it into the
groove.
Kontakt:
J. Wagner GmbH
Otto-Lilienthal-Str. 18
88677 Markdorf
T. +49 (0)75 44 - 5 05.0
F. +49 (0)75 44 - 5 05.200
