Jackson AVENGER HT-E Installation, Operation & Service Manual Download Page 5

Page: 5 / 61

AVENGER HT-E

High temperature, hot water sanitizing, with a booster tank

detergent & rinse aid chemical feeder pumps

AVENGER LT-E

Low temperature, chemical sanitizing, with detergent,

rinse aid & sanitizer chemical feeder pumps.

Model:

Serial No.:

Installation Date:

Service Rep. Name:

Phone Number:

NOMENCLATURE

Jackson WWS, Inc. provides

technical support for all of

the dishmachines detailed

in this manual. We strongly

recommend that you refer to

this manual before making a call

to our technical support staff.

Please have this manual with

you when you call so that our

staff can refer you, if necessary,

to the proper page. Technical

support is not available on

holidays. Contact technical

support toll free at

1-888-800-5672.

Technical support is available

for service personnel only.

Summary of Contents for AVENGER HT-E






























































Search results

Summary of Contents for AVENGER HT-E

Reviews:

Related manuals for AVENGER HT-E

Brands by name

Popular brands

Jackson AVENGER HT-E, Installation, Operation & Service Manual

Search results

Summary of Contents for AVENGER HT-E

Reviews:

Related manuals for AVENGER HT-E

Brands by name

Popular brands