© 2017 Jackson Labs Technologies, Inc.
93
RSR GNSS Transcoder™ User Manual
4.13.3 SYSTem:COMMunicate:SERial:BAUD
This command sets the USB serial speed. The serial configuration is always 8 bit, 1 stop bit, no
parity, no flow control. Upon Factory reset, the speed is set at 115,200 baud. This command has the
following format:
SYSTem:COMMunicate:SERial:BAUD <9600 | 19200 | 38400 | 57600 | 115200>
4.13.4 SYSTem:FACToryreset ONCE
This command applies the Factory Reset setting to the NVRAM. User parameters and calibration
parameters are overwritten with factory default values.
4.13.5 SYSTem:ID:SN?
This query returns the serial number of the unit.
4.13.6 SYSTem:ID:HWrev?
This query returns the Hardware version of the module.
4.13.7 SYSTem:STATus?
This query returns a full page of external GNSS receiver status in ASCII format. The output is
compatible with GPSCon. This command returns one of the most comprehensive external GNSS and
oscillator status pages.
4.14 SERVO Subsystem
This subsystem groups all the commands related to the adjustment of the servo loop:
SERVo:LOOP?
SERVo:COARSeDac <int> [0,225]
SERVo:DACGain <int> [0.1,10000]
SERVo:EFCScale <float>[0.0 , 500.0]
SERVo:EFCDamping <float>[0.0 , 4000.0]
SERVo:SLOPe <NEG | POS >
SERVo:TEMPCOmpensation <float> [-4000.0, 4000.0]
SERVo:AGINGcompensation <float> [-10.0, 10.0]
SERVo:PHASECOrrection <float> [-100.0, 100.0]
SERVo:1PPSoffset <int> ns
SERVo:QUIet <ON | OFF>
SERVo:TRACe <int > [0,255]
SERVo?
Summary of Contents for RSR GNSS Transcoder
