Jackson Labs RSR GNSS Transcoder, User Manual

Page: 76 / 128

RSR GNSS Transcoder™ User Manual
66 © 2017 Jackson Labs Technologies, Inc.
The unit would thus indicate: HEALTH STATUS: 0x54
A health status of 0x0 indicates a properly locked, and warmed-up unit that is completely healthy and
has no flagged events.
4.7.13 SYNChronization?
This query returns the results of these four queries:
SYNChronization:SOURce:MODE?
SYNChronization:SOURce:STATE?
SYNChronization:LOCKed?
SYNChronization:HOLDover:DURation?
SYNChronization:health?
4.8 DIAGnostic Subsystem
This subsystem groups the queries related to the diagnostic of the internal oscillator. The list of the
commands supported for this subsystem is as follows:
DIAGnostic:ROSCillator:EFControl:RELative?
DIAGnostic:ROSCillator:EFControl:ABSolute?
DIAGnostic:LIFetime:COUNt?
4.8.1 DIAGnostic:ROSCillator:EFControl:RELative?
This query returns the Electronic Frequency Control (EFC) output value of the internal reference
oscillator. It returns a percentage value between -100% to +100%.
4.8.2 DIAGnostic:ROSCillator:EFControl:ABSolute?
This query returns the Electronic Frequency Control (EFC) output value of the internal reference
oscillator. It returns a value in Volts.
4.8.3 DIAGnostic:LIFetime:COUNt?
This command returns the number of hours the unit has been powered-on.
4.9 MEASURE Subsystem
This subsystem groups the queries related to some parameters that are measured on-board on the
RSR GNSS Transcoder™. The list of the commands supported for this subsystem is the following:
MEASure:TEMPerature?
MEASure:VOLTage?