RSR GNSS Transcoder™ User Manual
52
© 2017 Jackson Labs Technologies, Inc.
4.3.23 SIMulation:TRACe
This command sets the output rate for the periodically generated statistics output for the simulation.
The format of this command is:
SIMulation:TRACe <interval>
where <interval> is the delay in seconds between simulation trace output in seconds. Zero indicates
the simulation trace output is disabled.
The simulation trace output has the form:
[yy-mm-dd] [hh:mm:ss.sss] [wn] [tow] [update count] [state] [sat count]
Where
[yy-mm-dd] and [hh:mm:ss.sss] are the UTC date and time used in the simulation,
[wn] and [tow] are the GPS week number and time of week,
[update count] is the 10 Hz simulation update count starting at 0,
[state] is the simulation state (see table below), and
[sat count] is the number of satellites in the simulation.
Below is example output:
17-04-27 09:17:35.243 1946 379055.243 6166544 7 10
17-04-27 09:17:36.243 1946 379056.243 6166554 7 10
17-04-27 09:17:37.243 1946 379057.243 6166564 7 10
17-04-27 09:17:38.243 1946 379058.243 6166574 7 10
The state number is a numeric represenation of the state response from the SIM:STATE? query as
seen defined in following table:
State
SIM:STATE? output
1
STOPPED
2
WAITING NMEA 9600 BAUD
3
WAITING NMEA 38400 BAUD
4
WAITING GPS FIX
5
WAITING PPS
6
STARTING
7
RUNNING
8
STOPPING
Summary of Contents for RSR GNSS Transcoder
