Jackle conMIG 400, Operating Manual

Page: 36 / 72

conMIG 400/445/545
Operating manual Page 33
25. Overview control functions
Functions MC 3 MC 4 MC 5 MC15
Step switched welding source (conMIG) ■ ■ ■ ■
Manual mode ■ ■ ■ ■
Automatic mode ■ ■
Wire feed rate tuning ■ ■
Material adjustment ■ ■
MIG mode ■ ■ ■ ■
2-cycle, 4-cycle, spot welding ■ ■ ■
Special programs ■
Backup function for user programs (100 pieces) ■
Gas test
■ ■ ■
Wire feed in ■ ■ ■ ■
Cooling medium flow indicator ■
Cooling medium min flow adjustable ■
Welding power adjustable over material thickness, preview - step
switched
■ ■
Start speed (Sts) adjustable ■ ■ ■ ■
Burn back time (bUb) adjustable ■ ■ ■ ■
Gas post flow time (PoG) adjustable ■
Gas pre flow time (PrG) adjustable ■
Spot time (Spt) adjustable ■ ■ ■
Welding choke user adjustable ■ ■ ■
Remote control function user adjustable ■
Welding cable length adjustable
■
Machine type adjustable ■
Update for welding curves ■ ■
Control unit lock / unlock ■
Fan / water pump (if installed) controlled ■ ■ ■
Display HOLD time adjustable ■ ■ ■
Reset to factory settings ■ ■ ■
Display for welding current in A ■ ■ ■ ■
Display for welding voltage ■ ■ ■ Option