![background image](http://html1.mh-extra.com/html/jabiru/3300/3300_instruction-and-maintenance-manual_3128472047.webp)
Page No: 47
Issue No: 1
Date: 031100
Issued By: PJA
7.4.4
Sub-Assembly D - Sump and Oil Pump
Sump
D1
1)
Clean sump and remove all gasket eliminator.
2)
Inspect oil pick up.
D2
Remove induction O Rings.
D3
Inspect carburettor coupling replace if it is damaged or showing signs of
deterioration.
Note: It is very important that the carburettor and coupling are free of
oil. If there is any oil present at all, it is possible for the
carburettor to slip out of the coupling
D4
Fit new induction O Rings to Induction Pipes. Engines from S/N 68 used a bolt on
swept chamber and new induction pipes.
Oil Pump
D5
1)
Inspect oil pump inner and outer for damage to rotor surfaces.
2)
Measure rotor clearance.
Drawing 9440064
Housing to Outer Rotor clearance 0.07mm to 0.14mm (0.003" to 0.006")
Inner Rotor to Outer Rotor 0.07mm to 0.14mm (0.003" to 0.006")
3)
Fit Inner Rotor into Outer Rotor. Using straight edge check end clearance.
End Clearance 0.03mm to 0.006mm (0.0015" to 0.003")
Summary of Contents for 3300
