![background image](http://html1.mh-extra.com/html/jabiru/3300/3300_instruction-and-maintenance-manual_3128472032.webp)
Page No: 32
Issue No: 1
Date: 031100
Issued By: PJA
20
Remove
Sump
3/16"
Allen
Key
21
Remove Exhaust and Induction Pipes
3/16" Allen Key
22
Remove Tappet Covers
3/16" Allen Key
23
Remove Rocker, Rocker Shafts and Push Rods
3/16” Allen Key
24
Remove Cylinder Head
1/4" Allen Key
1/2" Socket
25
Remove Push Rod Tubes
-
26
Remove
Cylinder
7/16"
Crowsfoot
Removal of Piston
27
Remove 1 Wrist Pin Circlip
-
28
Remove Wrist Pin (keep pin matched with its piston)
-
29
Remove Piston Rings (keep rings matched with its piston) -
30
Repeat Operations 27-30 on other pistons if required.
-
Crankcase Disassembly
31
Remove main Stud Nuts on Front 2 studs
7/16" Socket
32
Double check that every bolt is removed and sump,
-
gear case engine mount plate, oil pump and
Front Oil Seal Carrier is removed
33
Tap Crankcase slightly and open Crankcase by
Soft Faced Hammer
removing half Crankcase
34
Remove both Crankcase Halves of Crankshaft and
-
Remove
Cam
Shaft
35
Remove Valve Lifters (12)
-
Note - Keep valve lifters matched to each
Crankcase
half.
Summary of Contents for 3300
