
Page No: 63
Issue No: 1
Date: 031100
Issued By: PJA
c)
Apply Loctite 515 to left side of the crankcase.
H2
a)
Fit cam shaft to left side
b)
Inspect
1)
Bearing shell in position
2)
Loctite on all areas
3)
O
Rings
in
4)
Piston/Cylinder
Assembly
complete
5)
Thrust
washers
in
position
6)
Dowels
in
7)
Lifter are in with moly grease on faces
c)
You will need 1)
An extra person
2)
4 7/16 Ring Open End spanners
3)
2 9/16 Ring Open End spanners
4)
2 3/8 Plain grade 5 nuts
5)
2 3/8 Belleville Washers
6)
26 through stud nuts (MS21042L6)
7)
10
through
studs
8)
Torque
wench
9)
7/16 x 3/8 drive 2" extension
(snap on no fres 14)
10)
Long
Nose
Pliers
Note: An extra person makes it easier to bolt up and also can cross check
work.
H3 a) Stage
Inspection
b)
Oil all bearing, crank and camshaft
c)
Fit halves over crankshaft assembly and squeeze up by hand.
H4
a)
Using spacers and plain nuts on rear studs and belleville washers and
MS21042L6 nuts on the front studs pull the crankcase together (but don't
do up tight)
b)
Remove rear nuts
H5
Put all through studs in
H6
a)
Fit piston/cylinder assemblies to No. 1 & 2 conrods
b)
Fit circlips cross check circlips for correct fit. Push cylinders home.
c)
Put cylinder base nuts (MS21042L6) on. Using 2 7/16 ring spanners do
up each side together.
If one nut goes on more than 3 turns put the 3/8 plain nut on top of it and
use a 9/16 ring spanner to hold the nut, locking up the stud.
Summary of Contents for 3300
