REL1.0
Page 102 of 106
RZ/G1H Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Follow the below step by step procedure to integrate the RZ/G1H Camera Add-On Module in to RZ/G1H Development
platform.
1.
Insert M2.5x12mm pan head screw from RZ/G1H Qseven carrier board bottom side as shown below.
Figure 43: Insert Pan Head Screw
2.
Tighten the M2.5 x 5mm threaded metallic hex spacer into the inserted screw from RZ/G1H Qseven carrier
board top side as shown below.
Figure 44: Tighten Metallic Hex Spacer
