31
M
a
int
ena
n
c
e
■
Replacement procedure
Prepare a container to receive used oil in advance.
Remove the oil cap.
Remove the drain plug.
Use a container to collect used oil.
Replace the drain plug after the drive unit is emptied.
Remove old seal tape from the drain-plug threads and apply new one before refitting the plug.
Refill gear oil.
The specified oil volume is about 220ml. Always check an oil level comes to the middle of the oil gauge,
or the driven unit may fail to operate properly.
2
1
3
4
Drain plug
Oil cap
Red mark
Inspection
