15
EN
Instruction manual
WARNING! During the use of certain
gasoline tools, some dust containing
chemicals known to cause cancer,
may occur.
Some of these chemicals are: lead from lead based
paints, crystalline silica from bricks and cement and
other masonry products, arsenic and chromium from
chemically treated lumber and other dangerous
products. If dust is present, your risk from these
exposures varies, depending on how often you do this
type of work.
To reduce your exposure to these chemicals, any
time you do pulverulent operations, work in a well
ventilated area and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
∙
If the machine strikes a foreign body, examine the
device for signs of damage and carry out any necessary
repairs before restarting and continuing to work.
∙
If the machine starts to vibrate abnormally, switch
off the motor and check for the cause immediately.
Vibration is generally a warning of trouble.
∙
Always turn off the machine and wait until the
machine completely stops whenever you leave
the machine, before carrying out maintenance,
before changing accessories, checking, cleaning,
troubleshooting or working on the machine.
∙
It is forbidden to move or modify any of the internal
parts of the machine.
Electrical safety rules
CAUTION! Touching electrified parts
may cause death by electric shock or
burn.
ATTENTION! DANGER OF ELECTRIC
SHOCK!
Consider working area environment. Do not expose
power tools to rain. Do not use power tools in damp
or wet locations. Keep work area well lit and dry. Try
to prevent the device from getting wet or being
exposed to humidity. Do not leave it outside
overnight.
Specific safety rules
∙
Learn how to stop the generator quickly in case of
emergency.
∙
Understand the use of all generator controls, output
receptacles, and connections.
∙
Be sure that anyone who operates the generator
receives proper instructions.
CAUTION! Exhaust contains poisonous
carbon monoxide, a colorless and
odorless gas. Breathing exhaust can
cause loss of consciousness and may
lead to death.
∙
If you run the generator in an area that is confined,
or even partially enclosed, the air you breathe could
contain a dangerous amount of exhaust gas.
∙
To keep exhaust gas under control, provide an
adequate ventilation.
∙
The generator produces enough electric power to
cause a serious shock or electrocution if misused.
∙
Using a generator or electric appliance in wet
conditions, such as rain or snow, or near a pool or
sprinkler system, or when your hands are wet, could
result in electrocution. Keep the generator dry.
∙
If the generator is stored outdoors, unprotected
from the weather, check all electrical components on
the control panel, before each use. Moisture or ice
can cause a malfunction or short circuit in electrical
components which could result in electrocution.
∙
Do not connect to a building’s electrical system
unless an isolation switch has been installed by a
qualified electrician.
∙
Keep the generator at least 1 meter (3 feet) away
from buildings and other equipment during operation.
∙
Do not enclose the generator in any structure.
∙
Keep flammable materials away from the
generator.
∙
The muffler becomes very hot during operation and
remains hot for a while after stopping the engine. Be
careful not to touch the muffler while it is hot. Let the
engine cool before storing the generator indoors.
∙
Do not connect the generator to a commercial
power outlet.
∙
Do not connect with another generator.
UNPACKING
When unpacking, check to make sure that all
components are included. Refer to the drawings on this
manual. If any parts are missing or broken, please call
an IVT assistance center.
CONTROLS EXPLANATIONS
NOTE: not all the controls, devices, switches and
buttons listed in this paragraph may be present on
your specific model of machine.
Summary of Contents for GN-2200B
