IVT GBC-43BP, Instruction Manual

Page: 15 / 88

15
EN
Instruction manual
OPERATING INSTRUCTIONS
∙ Inspect and clear the area of any hidden objects
such as glass, stones, concrete, fencing, wire, wood,
metal etc.
∙ Make sure you can move and stand safely. Check
the area around you for possible obstacles (roots, rocks,
branches, ditches, etc.) in case you have to move
suddenly. Take great care when working on sloping
ground.
∙ Hold the unit with a firm grip with both hands while
in operation and maintain balance on both feet.
∙
Keep cutting attachment below waist level.
∙
Maintain the speed of the engine at the level
required to perform cutting work, and never raise the
speed of the engine above the level necessary.
∙
Keep all parts of your body away from rotating
cutting attachment and hot surfaces.
∙
Make sure shoulder strap (44) or backpack (45)
and the suitable safety guard (10) are properly fitted
and adjusted.
Operating the unit as grass trimmer
∙ Cut tall grass from the top down [F14] .
∙ If grass becomes wrapped round the cutting head
(9), stop the engine, disconnect the spark plug cap (32),
and remove the grass.
∙ Use the tip of cutting line (39) to do the cutting; do
not force cutting head (9) into uncut grass.
Operating the unit as brushcutter
∙ Position yourself so that you will not be drawn off
balance by the kick-back reaction of the brushcutter
blade (13).
∙ The brushcutter blade (13) is used for tall or coarse
grass, but it must not be used for woody stems.
∙
For cutting ease and safety, approach the weeds
being cut from the right to the left. In the event an
unexpected object or woody stock is encountered, this
could minimise the blade thrust reaction.
∙
Cut down grass with a sideways, swinging
movement, where the movement from right-to-left is
the clearing stroke and the movement from left-to-
right is the return stroke. Let the left-hand side of the
brushcutter blade (13) (from 8 o’ clock to 12 o’ clock) do
the cutting. If the brushcutter blade (13) is angled to the
left when clearing grass, the grass will collect in a line,
and it will be easier to collect it. [F15]
∙ Try to work rhythmically. Stand firmly with your feet
apart. Move forward after the return stroke and stand
firmly again.
∙ Never use a brushcutter blade (13) near footpaths,
fencing, posts, buildings or other immovable objects.
∙ Never use a brushcutter blade (13) after hitting a
hard object without first inspecting it for damage. Do not
use if any damages detected.
MAINTENANCE AND STORAGE
CAUTION! Before carrying out any
maintenance operation, turn off
the engine and wait until it stops
completely.
∙
Always keep the tool and the ventilation slots (if
present) cleaned. Regular cleaning and maintenance of
the appliance will ensure efficiency and prolong the life
of your tool.
∙
If the tool should fail despite the rigorous
manufacturing and testing procedures, the repair should
be carried out by an authorized IVT customer service.
∙ Keep all nuts, bolts, and screws tight, to be sure the
tool is in safe working condition.
∙ Replace worn or damaged parts for safety.
∙ Use only original spare parts. Parts not produced
by manufacturer may cause poor fit and possible injury.
∙ Store the tool in a dry room out of reach of kids and
away from any flammable material.
∙ Store all fuel tanks securely. Never store the
equipment with fuel in the tank inside a building, where
fumes can reach an open flame or sparks.
Blade protector (43) (if supplied)
Always place the blade protector (43) on the
brushcutter blade (13) when the unit is not in use. The
blade protector (43) has clips round the edges to snap
over the brushcutter blade (13) and keep it in place.
CAUTION! Always remove the blade protector (43)
before using the unit.
Flexible drive shaft (7)
The flexible drive shaft (7) is very delicate. To keep it
in good condition and prolong its service life, check
its condition periodically, clean and lubricate the inner
drive shaft.
Air filter [F16]
Soiled air filters reduce the engine output. Regular
checks are therefore essential. The air filter should
be checked after every 25 hours of use and cleaned if
necessary. If the air contains a lot of dust, it should be
checked more frequently.
1. Remove the air filter cover (28)
2. Remove the filter element (29)
3. Clean the filter element (29) by tapping it or blowing
it or, if necessary, by washing with warm soapy water.
Dry completely before installing. If the air filter element
(29) is broken or shrunk, replace with a new one.