Page 35 (52)
Ver 2_en_2022-06-27
Assembly Instructions
Envistar Flex
2. Lift with forklift truck under the straight plate or use mounted lifting lug. Lift up the upper
part of the thermal wheel level with the flat surface on top of the lower part of the thermal
wheel and push the upper part of the thermal wheel onto the lower part of the thermal
wheel until it is located in the middle of it.
• The top of the thermal wheel must not be lifted into or put onto the
shell.
• Disassemble the lifting lug immediately after use.
00115
3. Put a tensioning strap around the thermal wheel and tighten.
00118
4. Assemble the shell at the joints (letter markings) with self-tapping screws (JT2 5.5x35) in
both oval holes and round holes.
00127
A
A
5. Remove the tensioning strap.
