Page 22 (52)
Ver 2_en_2022-06-27
Assembly Instructions
Envistar Flex
ivprodukt.docfactory.com
Order Portal
6 ASSEMBLY, GENERAL
Read and follow each step carefully to avoid making errors and causing personal injury or
damage to surroundings or unit. See
"1 SAFETY”, page 6
,
"4 LIFT THE UNIT”, page 13
as well as
"5 PREPARE ASSEMBLY”, page 20
before starting assembly.
For example of set-up drawing and explanations of drawing symbols, see
"2.5 Symbols on
drawings and in manual”, page 11.
00176
Electrical voltage can cause electric shock, burns and death. The product
must not be energised during assembly.
Electrical connection and electrical work may only be carried out by a
qualified electrician.
For initial start-up of the unit, see Operation and Maintenance of the unit
on
IV Produkt's order portal
.
•
•
Risk of life-threatening or serious personal injury.
WARNING!
00179
Follow the lifting and assembly instructions in this manual.
Use lifting equipment where available.
Use appropriate protective equipment.
•
•
•
The unit parts are often heavy and cannot be lifted by hand. See weights
indicated on the layout drawing.
Risk of life-threatening or serious crushing or compression
injury.
WARNING!
00189
Art. Nr. 19194-0013
Follow the lifting and assembly instructions in this manual.
Use lifting equipment where available.
Use appropriate protective equipment.
Exercise caution when working between unit parts.
Exercise caution when placing unit parts on the support.
Use the support to secure the parts against possible tipping risk.
•
•
•
•
•
•
High unit parts, as well as unit parts with a high or offset centre of gravity,
mean a greater risk of tipping.
Risk of life-threatening or serious crushing or compression
injury.
WARNING!
00008
1
2
3
4
Figure: Examples of parts with a high centre of gravity or high tipping risk
1. Unit part with a high-placed coil
2. Unit part with high-placed fans
3. Unit part with high-placed damper section
4. Rotary heat exchanger