Operation Manual – ITW GSE 6400 Tier 4
h) “E” Checks and Operations (1500 Hours or 1.5 Years)
1) Engine.
a) Steam
Clean
Engine.
There are several reasons why the engine exterior should be kept clean. Dirt on the outside
will enter fuel and oil filter cases and rocker housings when covers are removed, unless dirt
is removed first. A clean engine will run cooler and develop fewer hot-spots. Steam
cleaning is one of the most satisfactory methods of cleaning and engine; however, there are
some
CAUTIONS
to be observed.
WARNING
Exercise care to avoid injury and damage to eyes and skin
CAUTION
1. If a cleaning compound is used, select one that is free from acid and will not
remove paint.
2. Protect (or remove) all electrical accessories, such as voltage regulator, alternator,
and electrical wiring.
3. Seal all openings. DO NOT use a flammable solvent.
4.
DO NOT
use mineral spirits or solvents on a hot engine.
5. Remove or protect bottom panel of unit (belly pan) to protect insulation.
b) Clean
Fuel
System.
See engine manufacturer’s operation manual for instructions.
c) Check Alternator and Cranking Motor.
The alternator and cranking motor on this engine require no periodic lubrication.
OM2248 Rev B
Page 62 of 104
