Operation Manual – ITW GSE 6400 Tier 4
1. LED Graphical Display
2. Navigation
Keypad
3. Power ON "Blue" LED
4. Warning "Amber" LED
5. Alert/Failure "Red" LED
6. Current Limit Adjustment Buttons
7. Output ON "Green" LEDs
8. Output ON/OFF (Reset) *
9. Power ON & Engine Start/Stop (Reset) *
* All output and engine buttons are multitasking buttons dependent on the status of the unit. The
displayed screen is NOT important. These buttons are always active.
CAUTION
To eliminate the possibility of wet stacking (See Appendix B), DO NOT allow the
engine to idle for long periods.
c) Failed Starting Procedure
If an error during initialization occurs the engine fails to start after 3 automatic attempts (15 seconds
crank, 15 seconds wait per attempt), the display will show a fault. Diagnose and treat the reason for the
fault, clear the fault, and press the engine start button again.
2
3
4
5
6
7
8
1
9
OM2248 Rev B
Page 31 of 104
