15
USER MANUAL SPIKA
For modular models remove the back panel (see figure).
3) Clean condenser using a vacuum cleaner, soft brush or low pressure air. Clean from top to bottom, not side to side.
Be careful not to bend the condenser fins.
(2) Water Condenser
The water condenser may require cleaning due to scale build-up. The cleaning procedures require special pumps and
cleaning solutions. They must be performed by qualified maintenance or service personnel.
CLEANING THE OUTSIDE OF THE MACHINE
Clean the area around the ice machine as often as necessary to maintain cleanliness. Sponge any dust and dirt off the
outside of the ice machine with mild soap and water. Wipe dry with a clean soft cloth. A commercial grade stainless steel
cleaner/polish can be used as necessary.
CHECKING FOR WATER LEAKS
This must be done whenever maintenance is carried out on the machine: check all water connexions, braces, tubes and
hoses in order to eliminate leaks and prevent breakages and flooding.
Back panel
Summary of Contents for spika
Page 60: ...COD 6487_27 04 2017 ...
