ITT Bornemann SLH-4U, Operating Instructions Manual

Page: 62 / 76

Interval Module (if available) Who Measure
Mechanical seal Specialist per-
sonnel
n Check for leakage.
n In the event of severe leakage:
–
Determine leakage intensity by counting
the drops.
– Consult manufacturer (specify leakage
site and intensity).
– Replace mechanical seal (consult the
manufacturer).
Shaft sealing rings Specialist per-
sonnel
n
Check for leakage.
n
In the event of severe leakage:
–
Check oil levels at short intervals.
– Determine leakage intensity by counting
the drops.
– Consult manufacturer (specify leakage
site and intensity).
– Replace shaft seal (consult the manufac-
turer).
Sealing system
Quench system
Specialist per-
sonnel
n Check function.
1)
n Clean filter and bleed valve.
1)
n Top up barrier fluid if necessary.
1)
n If barrier/quench liquid is contaminated:
–
Check mechanical seal and renew bar-
rier/quench liquid.
Drive unit 1)
Specialist per-
sonnel
n Check for wear. 1)
Heating (optional)
1) Specialist per-
sonnel
n Check function.
1)
n Check tightness.
1)
After the first 250 hours
of operation, at the
latest after 3 months
Gear casing 2)
Specialist per-
sonnel
n
Change lubricating oil ( Ä ‘Filling lubricating
oil’ on page 64 ).
3 months Sealing system
Quench system
Specialist per-
sonnel
Change barrier/quench liquid.
With intermittent opera-
tion: every 1000 hours
of operation, at the
latest after 6 months
Gear casing 2)
Specialist per-
sonnel
n
Change lubricating oil ( Ä ‘Filling lubricating
oil’ on page 64 ).
Every 6 months Barrier system Specialist per-
sonnel
Change barrier fluid.
With continuous opera-
tion, every 3000 hours
of operation
Gear casing 2)
Specialist per-
sonnel
n
Change lubricating oil ( Ä ‘Filling lubricating
oil’ on page 64 ).
Yearly
Gear casing
2) Specialist per-
sonnel
n Clean bleed filter.
n Replace if necessary.
1)
Manufacturer's specifications, pump system operating instructions
2)
Includes bearings and gears
Maintenance and repairs
62 Type SLH-4U
0
3
/20
20
JP Rev. 1