ITR POLAR HD, Installation And Operating Manual

Page: 21 / 80

International Thermal Research 3-1
Installing the Exhaust System
3.1 Before You Begin
For efficient and safe operation of the POLAR™ HD Heating Module
follow all recommendations for properly installing the exhaust. Any
deviations from these must be approved in advance by ITR.
Although the heater’s exhaust produces very low carbon monoxide
emissions, caution is still advised:
• Do not operate the POLAR™ HD Heating Module in an
enclosed area unless there is adequate ventilation.
• Isolate the POLAR™ HD Heating Module in a closed
compartment so that no air from the unit will infiltrate the
living areas.
Never place any exhaust parts close to combustible material or
through a combustible wall or ceiling without fireproof protection.
The exhaust can reach high temperatures.
3.2 Mounting Location
If you can’t meet the technical specifications for mounting
the exhaust, don’t use the POLAR™ HD Heating Module. The
unit may perform poorly or become damaged if not installed
according to specifications.
Recommended Exhaust Outlet Locations
The following is recommended for a coach exhaust outlet location:
• Mount the exhaust outlet outside the vehicle, not inside the
heater compartment. Otherwise, exhaust fumes could
infiltrate the vehicle from the POLAR™ HD Heating Module.
Section
3
!
DANGER