ITR POLAR HD, Installation And Operating Manual

Page: 18 / 80

Section 2, Mounting the POLAR™ HD Heating Module
2-4 POLAR™ HD Heating Module
Isolate the unit in a closed compartment so that no air from the
heater will infiltrate the living areas.
• It is recommended that a catchpan be placed under the
POLAR™ HD Heating Module for containing any unexpected
leakage.
• Choose a sturdy surface in a location that won’t be unduly
affected by vibration and the jarring of rough roads or rough
seas. Use appropriate isolation mounts for mounting the heater
if required.
• Ensure that the exhaust tubing can be properly and safely
routed to the outside. The maximum exhaust run for the
system is 12’ (see chapter 3).
2.4 What NOT to Do
• Don’t mount the POLAR™ HD Heating Module in any area that
is required to be low noise.
2.5 Procedure
After choosing the mounting location for the POLAR™ HD Heating
Module, mount the module horizontally and level. Secure the
POLAR™ HD Heating Module in place (against the wall, floor or a
mounting platform) using eight (8) x 1/4” through bolts and 1”
diameter fender washers, lock washers, and nuts. (See Figure 2-2:
Module Mounting Brackets.).
! DANGER