
1
ENGLISH
MICRO vibrators are manufactured following the European Community Directives.
The basic technical characteristics are:
- insulation class F;
- mechanica protection IP;
- power supply as in table page 1;
- operating ambient temperature: -0°C ÷ +0°C;
- maintenance free;
- continuous duty.
SECTION 2 - Safety regulations
Users are advised to become fully familiar with the instructions in this booklet, par-
ticularly the safety regulations, paying great attention to those operations that are
particularly dangerous.
The Manufacturer declines all and every responsibility for failure to comply
with the safety and accident-preventing provisions described herein. The
Manufacturer also declines all responsibility for damage caused by improper
use of the motor.
Pay attention to the danger signs in this booklet. They precede an indication
of a potential danger.
When electrically operated equipment is used, it is necessary to take all the
necessary precautions in order to reduce the risk of fire outbreak, electric
shocks and personal injuries. Before the motor-vibrator is used carefully read
and become fully familiar with the following safety regulations. Keep this booklet
in a safe place after it has been read
.
- Before beginning operations, check that the motor-vibrator and the machine on
which it is installed are in a perfect condition. Check that operation is regular and
that there are no damaged or broken parts. Any damaged or broken parts must
be repaired or replaced by competent and authorized personnel.
- Repairs made by persons not specifically authorized by the Manufacturer shall
void the guarantee and might lead to operate unsafe and potentially dangerous
equipment.
- Never touch the motor-vibrator whilst it operates. Only proceed with maintenance
when the motor-vibrator and machine are off and with the plug removed from the
current socket. Wait until the equipment has cooled before working on the motor-
vibrator.
- Children or unauthorized, unskilled persons or those in poor conditions of health
are forbidden to touch or use the motor-vibrator.
Summary of Contents for MICRO M3/20
Page 75: ...75 A ...
Page 83: ...83 NOTE ...