ITALPRESSE 183630114, User Manual, Page: 95 / 108

6
HEATING
In the heating page, one may set the heating parameters of the upper and lower level
(eventual) of the press.
The visualisation and setting is done in double scale °C-°F. In the right hand frame,
clicking on the numbers, we can set the desired temperature, on the left we can
visualize the current temperature of the programme.
If the programme is in the heating phase the ON led will light up, if on the contrary the
temperature exceeds the set programme the OFF led will light up. If the current
temperature exceeds the programme set, an emergency circuit will be activated to
protect the programme and bring back the original working temperature.
To start up the programme click on the green OFF button, it will change status. If the
light above the said button starts flashing, the daily weekly timer is activated and will
block the heating from starting up.
Instead the TI> button is used to enter the lower level setting page.
On the same page, by touching the button on the lower right, it is possibile to
programme the boiler heating daily-weekly on/off timer, by touching the same button at
the top of the page, one is able to activate o deactivate the timer.
By touching this button, the operating panel will allow us to enter the page below.
Within this page, one finds the following buttons:, these allow the operator to return to
the desired main pages.