ITALPRESSE 183630114, User Manual, Page: 11 / 108

11
1. Packaging/transport
There are normally three methods of shipping the machine to the user:
• in packing cases
• in containers
• by truck
Transport in cases:
Packaging characteristics:
• The machine is contained in a single case.
• It is covered in cellophane and attached to the bottom of the case by rods to prevent it
from moving during shipping.
• The inner walls of the case are covered with tar-coated paper as protection from dampness.
• A layer of cellophane is stapled to the outside of the case to protect it from the rain.
• Reinforcing steel bands are wound around the case.
• The cases bear written instructions on the movement methods.
Raising:
Before raising the machine from the packaging, take note of its weight as
set out in table of chapter 2!
The case has two holes on the upper part. To open these holes, pull away the celophane covering.
! THE TOP OF THE CASE IS NOT REMOVABLE
When the holes are opened, access is gained to the hooking points of the machine as shown in
the diagram.