ITALPRESSE 183630114, User Manual, Page: 93 / 108

4
LA OPERATION MENU PAGE
The “ OPERATION ” menu page contains all the main commands and settings for use of
the press in operation mode.
1-By touching on the green tab, the required operation pressure settings can be
entered. Said value will be used to work out the oil-hydraulic thrust pressure on the
frame (red tab). The air thrust is instead equal to 1 kg / cm
2 =1 Bar;
2-The real-time thrust values and air vacuum values are displayed in the vicinity of the
top and bottom work beds. A green arrow will light up corresponding to either bottom-
up or top-down thrust.
3-PVC pre-heat value, i.e. the pressure exerted from the bottom-up on the PVC in order
to heat it up.
4-Machine basic commands synoptic symbol bar: MAN-AUT(manual / automatic mode
selector), COMMANDS (commands page), I/O (input/output status), PRESS CYCLE
COUNTER, TEMPERATURE.
5-Top work bed heating activation control (green LED), real-time temperature display in
°C and °F.
6-Settable values for cycle timer T00=PVC pre-heat time; T01=bottom vacuum wait
time - top air thrust wait time ;T02=pressing timer.
7-Press cycle operation message display.