21
INSTALLER
malfunction
controls
If you experience problems with ignition or operation,
or the pilot light goes out, the heater will go into
SHUTDOWN mode, and will automatically shut off the
gas supply.
sc/sV model (piezoelectric ignition)
Wait for 1 minute for the thermocouple interlock to cool
down before repeating the ignition procedure.
this operation can be repeated only 2 or 3 times. if
the heater doesn't start after three attempts, set the
master switch to off and contact technical service.
- Once the heater is running, set the clock and timer (if
present) for automatic operation, by setting the function
selector to timer mode (refer to the user instruction
booklet for details)
se model (electronic ignition)
- press the On/Off/Reset button to reset the appliance.
Once the heater is on, check that:
- the gas pressure at the gas intake is:
- the appliance can be shut off and back on again:
-- with the master switch on the control panel
-- with the room thermostat or timer
- the appliance can be shut off and back on again:
-- The fan starts running when the thermostat trips.
se
sc
sV
se
sc/sV
sc/sV
se
Summary of Contents for Eco SC Series
Page 1: ...SC SV SE Wall gas stoves NATURAL...
Page 37: ...37 notes notes...
Page 38: ...38 notes...
Page 39: ...39 warranty...
