Italjet DRAGSTER 125, Use And Maintenance Manual

Page: 99 / 404

1
6
3
2
3a
4
5
7
EN - 17
2.4.b Digital Instrument
1) Speed indicator (Speedometer)
km / h - mi / h.
2) Clock.
3) Fuel gauge.
4) Indicator km / mi partial or total
traveled / total or partial hours indi-
cator.
5) Expired scheduled maintenance
warning light.
6) “MODE” button.
7) “SET” button.
Speedometer (1)
Indicates the speed of the motorcy-
cle; the speed can be indicated in
km / h or mi / h depending on how
the unit of measurement has been
set.
Watch (2)
Indicates the time; it can be set with
a 24-hour or 12-hour scale
Fuel Gauge (3)
Indicates the fuel level inside the
tank; completely visible scale (3a)
indicates the maximum level, non
visible scale (3a) indicates the mini-
mum level, the light “ ” lights up.
Indicator of km / mi of partial or to-
tal distances / total or partial hours
indicator (4)
In this part of the display, it is possi-
ble to view the partial km / mi trav-
eled (TRIP A or TRIP B) and the
relative travel time, the total km / mi
traveled.
Expired scheduled maintenance
warning light (5)
The warning light flashes when
maintenance interval is in 100 km .
The warning light remains steady
when the km / mi of the mainte-
nance interval has been exceeded
and remains steady until reset.
After performing the maintenance,
display TOTAL ODO, then press the
“
mode
” button (6) for more than 10
seconds; the maintenance indicator
goes off.
MODE button (6)
The “
mode
” button allows you to
scroll through the software.
SET button (7)
The “
set
” button allows you to set
the unit of measure and to delete
partial counters.