Italjet DRAGSTER 125, Use And Maintenance Manual

Page: 100 / 404

MODE SET
EN - 18
2.5 ADJUSTMENT AND
DISPLAY SETTING
DANGER
All adjustments must be
made with the motorcycle
stationary.
Km / mi setting and 24 hours / 12
hours clock
- Press the “
mode
” button until the to-
tal km / mi is displayed.
- Press and hold the “
set
” button for at
least ten seconds to switch from the
unit of measurement km + 24 hours
clock to mi (miles) + 12 hours clock
and vice versa; the partial counters
are reset.
Time setting
- Press the “
mode
” and “
set
” buttons
at the same time for more than two
seconds, the hours and minutes
start flashing.
- Press the “
mode
” key to increase
the hours and the “
Set
” key to in-
crease the minutes.
- Press the “ mode ” and “ set ” buttons
simultaneously for more than two
seconds to confirm the time setting.
Setting km / mi and partial hours
“Trip A or Trip B”
- Press the “ mode ” button until “Trip
A” or “Trip B” is displayed, by quick-
ly pressing the “ set ” button you can
switch between displaying the par-
tial km / mi traveled to the partial
hours for the trip.
- To reset the partial km / mi traveled
and the partial time, press the “set ”
button for more than two seconds,
the values are reset, and a new
count starts again.