Italjet DRAGSTER 125, Use And Maintenance Manual

Page: 98 / 404

EN - 16
- Wait a few minutes and restart the
engine. If the warning light comes
on again, contact the nearest Ital-
jet Dealer to have the ABS system
checked.
Engine fault warning light “ ”
By turning the ignition key, the en-
gine control unit performs a self-di-
agnosis, the warning light comes on
for a few seconds and then goes out
indicating no anomalies.
If the warning light comes on while
the engine is running, it indicates
that there is a fault with the engine
or the injection system;
- Stop and turn off the engine.
- Wait a few minutes and restart the
engine. If the warning light comes
on, contact the nearest Italjet Deal-
er to carry out a check on the self-di-
agnosis system.
WARNING
Do not use the motorcycle
with insufficient oil pressure,
possible engine failure.
High beam warning light “ ”.
The light comes on when the high
beam is switched on using the ap-
propriate control located on the left
control block.
High coolant temperature warning
light “ ”.
It lights up when the coolant tem-
perature has reached the maximum
allowed value.
WARNING
Stop the motorcycle and turn
off the engine. Do not use the
motorcycle with a high cool-
ant temperature, possible en-
gine failure.
- Wait for the coolant to cool then
check the level as described in the
relevant paragraph or contact your
trusted dealer to check the fault .
Low fuel warning light “ ”
By turning the ignition key, the warn-
ing light comes on for a few seconds
and then goes off.
If the warning light comes on while
the motorcycle is being used, it indi-
cates that the fuel level has reached
the reserve level (2 liters), indicating
a limited range of travel; refuel as
soon as possible.
ABS warning light “
ABS
”
By turning the key, the ABS control
unit performs a self-diagnosis, the
warning light comes on for a few
seconds and then goes off indicat-
ing no anomalies.
If, on the other hand, the warning
light comes on while the motorcycle
is running, it indicates that there is a
fault in the ABS braking system:
- Stop and turn off the engine.