STARGEL
Stargel - 2018/04 - rev. 03
- 19 -
EN
CLEANING
When selecting this function, the beater starts running, whilst the freezing unit is
off. The
INCREMENT
and
DECREMENT
keys can be used to pass from slow
speed to fast speed and vice versa.
CAUTION
1 minutes after the function insert, the machine will automatically set at
"STOP" in order to avoid a heavy wear of both beater and cylinder.
EXTRACTION
The function is only accessible from Production mode and only from the Ice
Cream and Fruit cycles.
When selecting this function, relevant led lights up and fast beater motor will start
in order to take out ice cream from the cylinder easier.
On display:
Fast or slow speed can be obtained by using the INCREASE and
DECREASE
keys. To stop beating, press
STOP
or just wait for 3 minutes.
From
DISTRIBUTION
you may access to the function COOLED DISTRIBU
-
TION by pressing the key
PRODUCTION
. In this case,
PRODUCTION
key
led will light and the compressor will run 20 seconds, after which you return to
the standard distribution mode.
INCREMENT
This key increases those values that can be modified both in Programming and
in the values where allowed.
DECREMENT
This key decreases those values that can be modified both in Programming and
in the values where allowed.
The key is also used to reset alarm messages.
WATER DISPENSER
Pressed at any moment, water is dispensed by the water dispenser positioned on
the front of the machine).
To deactivate the dispensation of water, press the
WATER DISPENSER
key
again or wait for 1 minute.
3.4
ICE CREAM PRODUCTION (WORKING PROCESS)
After washing, sanitizing and throughly rinsing the machine right before its use, as per instructions
given in section 5, cleaning, draw the mix from the pasteurizing unit, pour the desired quantity
through the lid filling hopper into the cylinder, paying attention to respect minimum and maximum
quantities indicated in table, paragraph 1.2.2.
Before pouring the mix, make sure that frontlid and icecream outlet door are perfectly closed.
Press the
PRODUCTION
button and select the required cycle with the
INCREMENT
and
DECREMENT keys.
When the program is over, a beep will warn the operator.
TIMER:
03:00
Speed 1
STOP
stargel
5
STOP
stargel
5
STOP
stargel
5
STOP
stargel
5
STOP
stargel
5
