Isuzu NOVOCITI, User Manual, Page: 69 / 89

65
1. Remove the oil level plug.
2. The oil level can be checked to see whether it is in the line of the lower edge of the plug
hole. The correct oil level plug near the bottom of the hole level range is 0 to 10 mm. And
(0 and 0.39 in.) are among. If the oil level is too low, add oil through the oil level plug hole.
3. Attach it to the specified torque oil level plug, oil level plug tightening torque is 39 Nm.
Also check to see if any transmission fluid is leaking.
Changing the oil
1. Place a container beneath the drain plug for the oil.
2. Remove oil level plug and drain plug to drain oil into the container together.
3. Compressing the drain plug to specified torque (tightening torque of the drain plug 39 Nm)
after inserting the gearbox with new oil through the oil level plug hole, the bottom edge of
the hole to fill again.
4. After re-filling the oil, check to see whether the oil level reached the lower edge of the
level plug hole.
5. Oil level plug to specified torque compressing them to wear.
REAR AXLE DIFFERENTIAL GEAR OIL
Rear axle differential gear oil change according to the maintenance schedule
1. Place a container beneath the drain plug for the oil.
2. Remove the plugs to drain oil into the container.
3. 78.4 Nm of torque the drain plug after inserting a value in compressing; rear axle differential
oil level with new oil through the plug hole, re-fill the hole right up to the bottom edge of plug
hole.
4. Re-filling the oil level after the oil level control to the lower edge of the plug hole is
coming up.
5. Compress oil level plug torque value of Nm 78.4.