Isuzu NOVOCITI, User Manual, Page: 65 / 89

61
Lifting the Vehicle
1. Place the jack directly under the Jack point and make
sure it is straight. Jack; should be placed on a flat,
hard surface.
2. Turn the jack to extend the length of the upper part of
the point. Turn counter clockwise to lengthen.
3. Insert the Jack arm into the socket. Use the bleed
screw fully clockwise to rotate the notched end of the
crank before removing the Jack.
4. Jack slowly move up and down slightly to lengthen
his arm.
5. Make sure that the jack is in full contact with the Jack
point, and then make sure to move the vehicle and
continue.
Landing the vehicle
1. Crank three U-shaped air bleed screw to align with.
2. Slowly turn the bleed screw counter clockwise
3. When vehicle is fully lowered, turn the bleed screw
clockwise until the end.
4. Turn the jack lever fully clockwise.