Isuzu NOVOCITI, User Manual, Page: 59 / 89

55
2. Check the radiator cap and clean it. If the cover is damaged, replace it.
3. Install and attach the radiator cap securely.
4. Fill the expansion tank until
it’s on “MAX” line with tap water
5. Replace the expansion tank cap.
6. Start the engine and leave it idling for 20 minutes. Stop the engine, wait until it
cools off, and then discharge the water.
FAN BELT
Your engine used on the V - ribbed fan belt strain ordinary V-belt) according to the required
set up correctly. Improper strain, the sound came from the belt, or can cause the belt to tear
apart. The fan belt is damaged, this can be a cause of electrical or overheating the engine will
be properly generated. The belt strain must be carefully controlled.
When replacing the fan belt, use the Isuzu’s original
parts. To adjust belt strain:
1. Loosen the belt strain and loosen the lock nut of the mechanism.
2. Setting the belt strain with the right adjustment
3. When you set the strain, securely fasten the lock nut of the belt to the strainer
mechanism.
Replacing the belt:
1. Loosen the belt strain and loosen the lock nut of the mechanism.
2. Loosen the adjustment bolts and the belt from the pulleys and remove it.
3. Loosen the adjustment bolts and the belt from the pulleys and remove it.
4. Insert the new belt through the opening in the fan pulleys and attach the strap by
passing the channels by aligning with channels.
5. Turn the bolts and be sure to make adjustments for the belt strain until it is within the
standard range.