Isuzu NOVOCITI, User Manual, Page: 23 / 89

19
STARTING AND STOPPING THE ENGINE
Ignition Key
LOCK: On this option, place the key or put it out. Remove
the key and turn the steering wheel until it’s locked.
Steering wheel will lock in order to prevent any theft. In
ord
er to put the ignition key into “LOCK” mode, insert the
key and press it on “ACC” position and turn to “LOCK”
mode.
ACC: On this mode, you can listen to music and use other
accessories while the engine is off.
ON: Key will remain on this mode while the engine is working. This mode on the other hand,
can be used as pre-heating before starting the engine.
START: Start the engine at this mode. Release the key as soon as the engine starts. The key
will go back to “ON” (OPEN) mode automatically.
If the key
is not turned from “LOCK” (LOCKING) to “ON”
(OPEN) mode, when trying to turn the key turn it clockwise
or counter clockwise gently.
Starting the Engine
Windshield wiper blades, headlamp controller and AC keys remaining within, make sure you
set the
key “OFF” (CLOSED)mode.
Make sure you set the key “ON” (OPEN) mode in order to set
i ndicator and warning lamps to
light up normally and fuel level is enough.
Do not leave the ignition key on “START” (START) mode more than 10 seconds.
Running the ignition key for a long time may cause accumulation failure or with
overheating may lead to fire.