ISHIDA IL-EMZ, Service Manual

Page: 16 / 146

Chapter 1 INSTALLATION
1-8 IL-EMZ Service Manual
1.6 HARDWARE INSTALLATION
1. I
nstall the main body to be able to see
the display clearly and perform the key
operation easily.
2.
Make sure that the machine is
grounded at the power supply outlet.
3.
Insert the power plug into the outlet.
4.
When connecting other devices, connect them according to the following.
Other machine of the master/satellite system I2NET (INLINE) (Dsub 9 pin)
Optional printer······················································I2NET (OPTION1) (Modular jack)
IF-21FD ·································································I2NET (INLINE) (Dsub 9 pin)
Journal printer ·······················································RS-232C
5.
Fix the harnesses.
NOTE:
Nylon clamps to fix harnesses are not
attached. Prepare the nylon clamps
beforehand with their sizes according to
the number of the connected harnesses.
Fig.1 Rear Connectors
(Located in the rear cover)
6.
Load labels to be used by the user. Refer to “Label Replacement” in the User’s Manual.
(CAN,USA)