Chapter 4 SYSTEM SETTING MENU
4-16
IL-EMZ Service Manual
4.8 LABEL SPEC SETTING
Printing conditions can be set for each label number.
1.
Ensure that the System Setting Menu
screen is displayed.
Then, touch the [LABEL SPEC] button
on the screen.
2.
The Label Specification screen appears.
LABEL SPEC.
Enter a desired label number (1-99) and touch this field.
THERMAL PAPER TYPE
Touch to display pop-up screen for selection.
0:Receipt
1:Standard label (monochrome label)
2:Two color label
LABEL GAP
Set the label gap in units of 0.1mm. (Initial value: 2.0 mm)
PREPRINT FEED
Set the amount in units of 0.1mm for the preprint feed.
(Initial value: 7.5 mm)
BACK FEED
Always select “NONE”.
LABEL SHAPE
0:Standard (fixed at standard)
LABEL SENSOR
Touch to display pop-up screen for selection.
0:No use
1:Label sensor(default value)
Summary of Contents for IL-EMZ
