ironLogic Z-395 EHT, User Manual

Page: 3 / 14

page 3
Z- 395 EHT
www.ironlogic. me
Installation onto a wooden (chipboard) locker
www.ironlogic.ru
2
3
1
Make a 35 mm hole in the locker's door. To mark the hole position
use template from Fig. 13.
L ocker's door
Ø 35 ,0
Fig .1
Install the lock's push bolt unit onto the locker's wall (see Fig. 3,
4). To mark the hole positions, use template from Fig. 13.
Fig . 3
Fig . 4
Self-tapping Screw
3,5 х 15
locker's wall
Self-tapping Screw
3,5 х2 5
push bolt unit
Fig . 2
A - the calculated size, depends on
thickness of the locker's wall
A
Connect cable to lock's PCB.
Note: Check that cable socket is firmly connected with lock's PCB
socket. Install the locking module according to Fig. 2.
Batteries AA size 1,5V
Self-tapping Screw 4х 3 5
Screw 3х 6
Screw 4х 30