background image

page 

1

2

1

5

.

 

ADDITIONAL ACCESSORIES

D

etailed 

information about

 

all additional accessories

 can be found on the 

ironlogic.me website.

-  Metallic lock cover (NAM2)

Snaps onto the internal part of the lock. Provides attractive appearance and anti-vandal 
protection.

-  External power 

module

Provides power for locks. Convenient when programming the locks' operational

 

mode. Used to 

provide power to the lock, if the batteries 

are 

completely discharge

d

 and the lock is closed.

-  Bracelets 

(identifiers)

-  Lock module for lockers

A spare lock module without electronics, for replacement or repairs.

-  RF-1996 adapter

Used to set up the locks from the portable computer and subsequent bracelets programming.

-  LOCK'S MANAGER software

Used to set up the locks from the portable computer and subsequent bracelets programming.

16. OPERATING CONDITIONS

Ambient temperature: 

+5

+

40°C. 

Humidity: ≤ 98% at 25°C.
When  operating  under  non-recommended  conditions,  device  parameters  can  deviate  from 
specified values.  

17.  LIMITED WARRANTY. 

This Device is covered by limited warranty for 

24

 months since the

 

purchase date

.

The warranty becomes void, if:
-  this Manual's guidelines are not followed;
-  the device has suffered physical damage;
-  the device has visible traces of exposure to moist and/or aggressive chemicals;
-  the device circuits have visible traces of tampering by unauthorised parties. 
Under this warranty, the Manufacturer shall repair the device or replace any broken parts as 
required, free of charge, in cases where the fault is caused by a Manufacturer's defect.  

1

8

PACKAGE

 CONTENTS

-  Lock module: 

..................................

1;

-  Reader module: 

..............................

1; 

-  Battery compartment cover: 

...........

1;

-  Cable with connectors: 

...................

1;

-  Push bolt

 

unit: 

.................................

1;

Fixing set

.......................................

1.

Z-

395

 EHT

www.ironlogic.

me

Summary of Contents for Z-395 EHT















Reviews: