Installing Boot Camp support drivers
38
APPENDIX 1: IMATION SUPPORT FOR MACINTOSH
IronKey Workspace W700-SC User Guide
4.
In the Startup Manager, select the
USB Windows
device option.
If there are two USB options, choose the option that says “Windows”. Otherwise, if only one USB option
displays, such as “EFI Boot” choose that one.
5.
In the Workspace Preboot environment, if your Mac model requires you to use the alternate reboot
method (see Table 4 on page 34), click
Options
and click to clear the
Use default reboot behavior
check
box. Click
Use alternate reboot method
, and then click
Back
.
6.
In the Workspace Preboot environment, type the SmartCard PIN in the text box of the
Unlocker
window
and click
Unlock
.
7.
Click
Reboot Now
and immediately hold the
Option
key again.
8.
When the Startup Manager opens, select the USB Windows device option again. The Windows To Go
operating system will now start up.
9.
Type the Windows password (if applicable) and press
ENTER
.
When Windows To Go has successfully started, you can install Boot Camp 5.1 Support Software.
Tip:
If you do not press the
Option
key in time and the Mac operating system starts, click
Restart
on the
Welcome screen (or click the Apple menu and choose
Restart
), and then
immediately
hold the
Option
key to
open the Startup Manager.
To install Boot Camp Support Software in Windows To Go
1
If Windows To Go already has a download of the Boot Camp Setup files, go to step 5. If you downloaded
the files to a USB device, go to step 2 to copy the files to Windows To Go.
2.
In Windows To Go,
plug the USB flash drive (with the version of Boot Camp 5.1 Support Software required
for this Mac) into a USB port.
3.
In
Finder
, locate the Boot Camp support files on the USB flash drive and copy them to the Windows Desk-
top. If you downloaded both versions of Boot Camp 5.1 support software, you can copy both versions to
Windows To Go but you should only install the version that supports the Mac you are currently using.
