Copyright 2021 Iron Bow Technologies
21
Sharing Content from Connected Devices
You can share content from devices connected to either the HDMI port or the VGA port.
These two ports are shown in
Figure 3
.
Changing Video Source Button Assignment
By default, the Transmit PC selection control is associated with the HDMI source, and
the Transmit Horus Scope selection control is associated with the VGA source. If
required, you can reverse this assignment:
Transmit PC
sends the image from a connected PC or HDMI device to the
remote site as a second image in conjunction with the main system camera.
The image will automatically be shown as a window on the main screen. To
end transmission, select the control again or select the Horus Scope input,
which will replace the PC image with the Horus Scope image.
When the PC
transmission is active, the LED associated with this control will illuminate
Transmit Horus Scope
sends the image from a connected Horus Scope or VGA
device to the remote site as a second image in conjunction with the main system
camera. The image will automatically be shown as a window on the main
screen. To end transmission, select the control again or select the transmit PC
input, which will replace the Horus Scope image with the PC image.
When the
Horus Scope transmission is active, the LED associated with this control will
illuminate
Press and hold simultaneously the “Hang Up” and “Transmit
Computer” controls for 5 seconds. The “Transmit” and
“Horus Scope” buttons will now select the opposite inputs.
If you desire to reverse the setup, repeat the above operation.
+
Summary of Contents for CLINiC-P-12X27-B02
Page 27: ...Page intentionally left blank ...
