Copyright 2021 Iron Bow Technologies
18
Managing Calls
You can manage calls by either using the integrated control panel or the remote. This
section describes how to manage calls by using the integrated control panel. For
instructions on how to manage calls using the remote, please refer to the
Polycom
RealPresence Group Series User Guide
, available at the following link:
http://support.polycom.com/PolycomService/support/us/support/video/group_series/group300.html
Answering a Call
The default behavior of the CLINiC is to answer all incoming calls automatically.
This behavior can be changed from the web interface to the codec (see
CLINiC
Administration
).
Answering a Call
If the CLINiC is not set to answer incoming calls automatically,
the system will prompt you to answer the call manually when an
incoming call is received. To answer a call manually, press the
green “Answer Call” control on the tactile membrane control panel
Ignoring a Call
If the CLINiC is not configured to answer calls automatically, you
can manually ignore a call. To ignore an incoming call manually,
select the “End Call” control on the tactile membrane control panel
Ending a Call
To end a call, select the “End Call” control on the tactile membrane
control panel
Placing a Call
You may place a call to a pre-defined address by selecting the
“Make Call” control on the tactile membrane control panel. Before
you can place a call to an address, it must be added in the codec as
a favorite contact with first name
auto
and last name
dial
, using
the web interface to the codec (see
CLINiC Administration
)
Summary of Contents for CLINiC-P-12X27-B02
Page 27: ...Page intentionally left blank ...
