Copyright 2021 Iron Bow Technologies
16
Waking Up the CLINiC
The system goes to sleep after two hours with no activity. This value can be changed
from the web interface to the codec (see
CLINiC Administration
), to wake the system up:
Press any button on the integrated control panel. If you are using the optional remote,
press any button on the remote or just move the remote.
Powering Off the CLINiC System
Powering off the CLINiC is typically unnecessary. Most video endpoints remain
connected to the network and in stand-by mode until a call is placed or received. To
power off the CLINiC, disconnect rom the AC power which may be required if the
system is being moved to a different location
Powering the CLINiC Codec On and Off
Touch and hold the power sensor. Release the power sensor when
the light indicator changes color and wait until the codec is off.
Touch and hold the power sensor again to restart the codec.
Summary of Contents for CLINiC-P-12X27-B02
Page 27: ...Page intentionally left blank ...
