Copyright 2021 Iron Bow Technologies
20
Managing Audio Settings
This section describes how to manage audio settings by using the integrated control
panel. For instructions on how to manage audio settings using the remote, please refer to
the
Polycom RealPresence Group Series User Guide
, available at the following link:
http://support.polycom.com/PolycomService/support/us/support/video/group_series/group300.html
Enabling and Disabling Microphone Mute Mode
Adjusting Speaker and Headphone Volume
Enabling and Disabling Headphone Operation
Enabling and Disabling Stethoscope Mode
Adjusting Transmission Audio Gain
You can adjust the gain of the audio signal transmitted from the codec to optimize the
audio experience at the remote end (see
CLINiC Administration
).
Microphone Mute
selection stops the room audio from the integrated
microphone being transmitted to the remote site. On activation, an LED
indicator illuminates on the control panel, plus a microphone mute icon
appears on the display. A second selection resumes the room audio
transmission. This function mutes only the integrated microphone does
not affect transmission of an electronic stethoscope, if connected.
The volume functions are controlled by the
+
and
–
signs. A volume
indicator bar is displayed on the top right hand side of the screen
indicating the volume level
The remote site audio is always available through both the system
speakers and available for listening using connected headphones. By
activation of the Headphone mode, the audio is only available through
connected headphones for private listening. On activation, the
associated LED illuminates above the control button.
Stethoscope Mode optimizes audio transmission of the stethoscope
signal connected to the stethoscope audio input, while automatically
muting the internal system microphone to minimize room audio
interference. If it is required to transmit the microphone(s) as well as
the stethoscope, select the microphone mute button to “un-mute” the
microphones. In Stethoscope Mode, the stethoscope signal is only sent
to the remote end and will not play through the speakers. On
activation, the associated LED illuminates above the control button.
Summary of Contents for CLINiC-P-12X27-B02
Page 27: ...Page intentionally left blank ...
