Iridex OcuLight Symphony, Operator'S Manual

Page: 27 / 68

21
Operation
31144C-EN
Assembling the slit lamp table (
For IRIDEX slit lamp workstation only)
1. Place the pedestal upside down with the switch facing away from you.
2. If present, remove and reserve the four pedestal screws.
4. If a small metal cover is attached to the underside of the base, remove
and reserve the screws from each end. The underside of the cover is
attached to a grounding wire by a star washer and fixation nut. Leaving
the cover attached to the grounding wire, remove the cover to expose
the hole in the base; set the cover aside.
5. Ensure that the base is upside down and the arc is facing away from
you.