Iridex OcuLight Symphony, Operator'S Manual

Page: 50 / 68

44
OcuLight Symphony Operator Manual
31144C-EN
Before Treating Patients
1. Ensure that the OcuLight consoles, the slit lamp, and the
OcuLight Symphony Adapter are properly connected and set up.
2. Ensure that your slit lamp oculars are properly adjusted.
3. Post the laser warning sign outside the treatment room door.
4. Turn on the OcuLight consoles.
5. Ensure that the fiber-optic cable labeled 532 nm is connected to the
OcuLight GLx.
6. Ensure proper connection of the other fiber-optic cable(s) and the
SmartKey:
• If using the OcuLight GLx or TX during treatment, ensure that the
SmartKey is connected.
• If using the OcuLight SLx console for treatments requiring the
large-spot fiber-optic, connect the fiber optic labeled 810-LS and
the SmartKey to the OcuLight SLx console.
• If using the OcuLight SLx console for treatments requiring the
standard spot fiber-optic, connect the fiber optic labeled 810 nm
and the SmartKey to the OcuLight SLx console.
7. Select the desired fiber-optic with the Fiber Switch on the Symphony
Slit Lamp Adapter.
8. Ensure that the spot is properly positioned and focussed.
REFERENCE
Read the Clinical and
Safety sections of your
OcuLight console manuals
and this manual before
using the OcuLight
Symphony System.
REFERENCE
See the Connecting
Components sections of
your OcuLight console
manuals and this manual
for connection
instructions
REFERENCE
See the Using the
OcuLight Symphony
Adapter section of this
manual for instructions on
adjusting the slit lamp
oculars and for properly
positioning and focussing
the spot.