Iridex OcuLight Symphony, Operator'S Manual

Page: 62 / 68

56
OcuLight Symphony Operator Manual
31144C-EN
Changing the Slit Lamp Fuse
(for IRIDEX slit lamp workstation only)
To check or change fuses:
1. Unplug the slit lamp main power cable from the electrical outlet.
2. Remove the other end of the slit lamp power cord from the main power
port. Beneath the main power port is the fuse cartridge.
3. Using a small screwdriver, gently push against the two locking tabs on
either side of the fuse cartridge until the cartridge pops up from the
port.
4. Remove the cartridge.
5. Remove and inspect both fuses.
6. If one or both are blown, replace them with new fuses.
7. Gently push the fuse cartridge back into the port until the locking tabs
latch.
11
5
REFERENCE
For instructions on
replacing the Zeiss slit
lamp fuse, see the Zeiss
model 30 SL and model 30
SL/M slit lamp operating
instructions.